How to Repair Garage Opener the Right Way

Garage door

Are you currently having problems with your garage door opener? Most people that have this problem are often experiencing nothing more than depleted batteries. It’s easy enough to open up the back, replace the batteries, and it should be able to open and close the garage door once again, but sometimes it’s not that simple. Additionally, the garage door opener is not limited to the remote that most people use. By pressing the button that is typically by the garage door leading into the house, this button can also become faulty, and will require repairs. This article will address how to repair garage opener the right way so that you can quickly have full access to your garage door once again.

 

Common Problems with Garage Door Openers

 

Once you have determined whether or not it is the garage door opener remote control, or if it is the button, you can proceed to fix either one. If it is the remote control, there are only two options that you have available. If replacing the batteries does not work, you must contact the manufacturer, or the garage door company that installed your garage to ask them to order a new one. However, this problem pales in comparison to a garage door opener proper, specifically the device that is responsible for opening and closing the door. Let’s look at how these are constructed, and how they work, and then go over some troubleshooting ideas.

 

What Is A Garage Door Opener?

 

This is a motorized device that is able to rotate a chain or belt that rotates clockwise and counterclockwise, allowing you to open and close your garage door. This must be mounted on the ceiling, preferably from the rafters, and only consists of two components. There is the electric motor housing, which is the power behind the device, which will plug into an outlet that is either their at the ceiling level, or you must have one installed. The other is the rail mechanism, that which contains the belt which will pull the garage door up, or drop it down. There are other components including the infrared sensors which are part of the mechanism, specifically the opening and closing of the door. There are sensors which are designed to look for objects, such as people or anything else that could be blocking the door from going all the way down. All of this works together to allow a remote control to open the garage door, or close it if necessary. It is also attached physically via wires to a button that when depressed, will open and close the door as well.

 

How to Fix the Garage Door Opener

 

Most of these units have adjustments on the side which you can manually turn in order to adjust the position of the door. If it is too far up or down, it will not operate properly, and only subtle changes in these adjustments will actually help resolve the problem. Typically there are knobs which can be turned to adjust the position, allowing you to put it in the right place. This will allow the door to move up the tracks via the rollers, and also allow the springs to be properly extended, when it is all the way up or back down at the ground level fully closed. The different units are made per the manufacturer’s specifications, which will allow you to make the right adjustments. Additional ways to fix the opener include lubricating the rail, checking the chain tension, replacing the gear assembly, or even replacing the circuit board. Many of these need to be accomplished by certified garage door repair companies so that they can be adjusted properly.

 

In conclusion, you now have a few ideas on how to repair garage opener the right way. These are just a few of the things that can go wrong with the garage door opener that can either be fixed to buy the average person, or they may require a professional. If you are having problems that are extensive, ones that you cannot fix on your own, a garage door experts abc is only a phone call away.